New MTB Bicycle Bike 3 x 7 Speed Shift/Shifter Brake Lever Combo

Reasonably priced But Still Meets Performance Expectations . Replaced Damaged "Twist Grips" (and Brakes) on a Used Schwinn Mountain Bike I Picked up. Wanted This Combo Because Handle grip Space Was Limited and therefore Separate Items (Brakes/Shifter) would take up too much Needed Space. The 1-7 Right Shifter Pointer is Off Slightly, But Not Enough to be Concerned With... Over All I am Pleased and would Recommend This Product To Others...

I needed to replace the shifters on my old bike and these did the job. Great for the money.

Installation was straight forward but took a while because I had to pull the gear shift wires out of their covers to install the new ones. It was worth the effort as I was able to run some light oil down the wires - my bike is over 40 years old (as can be seen in the pictures!) and this was the first time that has been done. Sorry bike! Brakes would have been really easy except my originals didn't have a side exit for the wire so they also had to be fully pulled apart - and oiled. Really nice, quick action for the rear cogs now and all 7 gears can be selected. It takes quite a bit of effort to select the large drive cog (3) at the front, but that is an adjustment issue that I need to tweak. Overall, an excellent replacement for my old levers and they forced me to do some maintenance, which was long overdue.Update Jan 11 2020I have had constant issues with the front 3-speed changer, it was always a struggle to find the top gear, requiring heavier and heavier thumb pressure to find the large gear. Eventually, it simply would not find it and, dismantling the lever, it could quickly be seen that the internals were worn out. Cheap/soft material not up to any sort of long term use. A real shame since the 7-speed rear shifter is still working properly. Don't buy these!

While I was installing the left side handle handle it broke. It had to have been a defect because all I did was test it. But after reaching out to Reamtop they fixed the problem.😀 prefect work

Just installed these and tested. I have to give them 2.5 stars (5 for the rear 1 for the front). The 7 speed side works amazing through all gears. Hits them right on and the brakes seem solid. I also like the speed downshifting capability. if you press lightly you can go down one gear, if you press a little further you can go down multiple gears. I can get through all 7 gears with 2 quick full presses going down. this will make the unexpected hill much easier. Going to higher gears is one press per gear. So on the 7 speed side I give it a 5.The 3 gear side I have to give a 1.When I tested it prior to being put on the bike it seemed like it would go through all 3 gears forward and backward. after putting it on the bike it was not able to handle the spring rebound of the front derailleur. It would shift through the bottom 2 rings just fine but when it would get to he top ring it would never lock in place and always just come back down (I also noticed the plastic casing of the shifter flexing trying to get to the top ring).Before people start to get on me about adjustment screws....The original front shifter still works great in all 3 positions!So after installing the back which was broke but now works better than it ever has I was excited to try out the front. Unfortunately since I could never get this one to lock on the top front gear. I tried adjusting the cable length and the screws on the front derailleur thinking maybe that either of those would help. I came to the conclusion that it was ultimately the spring tension in the top ring position. I did this by taking the derailleur out of the equation and gradually pulling the cable harder by hand (no tools used just cable wrapped around gloved hand) pulling on the cable just slightly did not allow it to lock into the top position. I had to revert to the old front.Since I already cut the cable to length on the back i'm probably not going to return it unless there is a way to only return one...

SOMETIMES you really DO get-what-you-pay-for...I couldn't find SHIMANO V-Brakes, so I took a chance on these (obvious) CLONES :-| ...- They INSTALLED just FINE;- They accepted high-quality cables & housings just FINE:- The REAR (7-gear) appears to work just FINE so far; BUT- The FRONT (3-gear) was BROKEN from the moment I tried the shifter :-OWORKED ALL AFTERNOON converting my road bike over to mountain bike with these shifters...... and as I shifted on my first test-drive... the front shifter (pulling on the cable to shift to LARGER gear ring) slipped inside its housing and DIDN"T pull on the cable.COMPLETE JUNKOFF to find replacements.Will NEVER buy from this vendor again - ever.-mad-as-Hell in North Aurora IL

I was looking forward to these as the twist type I don't like because I'm always switching gears by mistake. Unfortunately these were cheap and possibly defective. The front on worked fine but I couldn't get it to shift into one of the three gears but I could had adjusted that but never got to it. The rear worked once. I shifted from 7th to first and it was really hard to try and shift back up. It was so hard it actually frayed the cable so I took it off and started a return. I tried shifting it off the bicycle and still won't shift. You can say it's cheap however the cost to manufacture something like this is very low even to the best of brands although they may use better materials the profit is rather nice. These did look like they were made of a decent material I believe aluminum so I imagine its a problem with assembly.

I purchased these to replace some shimano twist shifters. The 7 speed side is dead on and works great. The 3 speed is very hard to adjust in the 3rd gear but this may just be a noncomputability issue with the derailleur as this shifter is upgraded from the one on the bike.

Wish I had bought these when I bought a derailleur for my son's bike instead of after. Very easy install, took about 20 minutes and I'd never done it before. A few adjustments and it they both shifted fine with the shimano rear derailleur and the no name front shifter. Not sure of quality but they appear to be good enough for what I need.

Very good and very cheap. Works perfectly!

They fit, they work, plastic is less robust than expected

My wife was happy of new shifter of her bike

Easy to use